Source-audio Hot Hand 3 Universal Wireless Adapter User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
Selecting an output mode | 11
As the MODE LED blinks, press the CALIBRATE button again to scroll
through the six output modes. The LED colors of the DEPTH and
SMOOTH knobs will change along with the MODE LED to indicate
which mode is currently selected:
EXPRESSION SENSOR SENSOR OUT
KNOBS MODE OUTPUT OUTPUT PROCESSED
1 GREEN GREEN X-axis X and Y NO
2 GREEN/RED GREEN Y-axis Y and X NO
3 RED GREEN Z-axis Z and X NO
4 GREEN RED X-axis X and Y YES
5 GREEN/RED RED Y-axis Y and X YES
6 RED RED Z-axis Z and X YES
To exit the output editing mode, press and hold the CALIBRATE (RESET)
button for two seconds or cycle the power on the receiver.
For future Source Audio products, the Hot Hand 3 receiver can output
all three axes digitally through the SENSOR OUTPUT. This is automati-
cally configured and if the connected pedal is capable of receiving
digital information, the MODE LED will change to green/red to indicate
that digital output is being used.
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments