Source-audio Hot Hand Phaser/Flanger User Manual download pdf (Page 17)

Factory Presets | 3332 | Sequencer Controls

Length (Effect=Flanger 05)

The sequence length selection. The selections are:

DEPTH

Knob Length

0 2/3/6

1 4

2 5

3 6

4 7

5 8 (default setting)

6 9

7 10

8 12

A selection of 0 on the DEPTH knob for the length parameter can yield any of

three different lengths (

2, 3, or 6), depending on the selected pattern:

Pattern

Selection Length

0 2

1 3

2 3

3 3

4 3

5 6

6 6

7 6

8 6

Transition (Effect=Flanger 07)

The time taken for the sequencer control signal to smoothly move from one

sequence level to another. A value on the

DEPTH knob of 0 gives the longest

transition time, and

8, the shortest. The fastest ones may sound clicky or

glitchy as the control signal moves very quickly from one level to the next. The

slowest ones can remove the sense of discrete steps, when the sequencer is

set to a high rate.

DEPTH Transition

Knob Rate

0 Slowest

2 (default setting)

5 8 (default setting)

8 Fastest

Factory Presets

These are the presets that the unit ships with. The notation for the DEPTH,

FREQUENCY/DELAY, and MOTION/SPEED knobs is as follows: There are 9 posi-

tions around each knob, numbered

0 to 8. There are 3 intermediate values

between each numbered position, which will be written as

.25, .50, and .75.

Thus a value of

6 means that only the LED in position 6 is lit, while 6.75 means

that the knob has been turned three clicks beyond

6, and that both LED’s 6

and 7 are lit, with 7 being brighter than 6.

PRESET 01 02 03 04

DEPTH 5.50 7.75 4.75 7.25

FREQUENCY/DELAY 1.50 2.50 3.00 8.50

EFFECT PHASER 03 FLANGER 01 PHASER 02 FLANGER 06

MOD SOURCE HOT HAND HOT HAND LFO/SEQ LFO/SEQ

MOTION/SPEED 4.00 5.50 4.75 1.75

INVERT Off Off Off On

Back Page Parameters (default values)

• Input trim 4

• Hot Hand Gain 4

• Hot Hand X/Y axis rotation 4

• Expression out scaling 2

• Hot Hand to LFO speed 4

• Knock control 0

• Sequencer/random select 0

• Sequencer pattern select 6

• Sequencer length select 5

• Sequencer transition rate 2

SAVE

(ALT) BACKPAGE

PRESET

EFFECT

(ALT) MOD SOURCE

MOTION/SPEED

PRESET

ON/OFF

ENVELOPE

CALIBRATE

LFO/SEQ

INVERT/SEQ ENABLE

DEPTH

(ALT) FREQUENCY/DELAY

HOT HAND

MOTION CONTROLLED PHASER/ FLANGER

ON/OFF

SELECT

(HOLD FOR ALT MODE)

00 08

FLANGER

PHASER

FLAIL

/SLOWPICK/FAST

STRUM

1 2 ... 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Source-audio Hot Hand Phaser/Flanger User Manual Page 17

Comments to this Manuals

Related products and manuals for Audio Source-audio Hot Hand Phaser/Flanger