Source-audio Hot Hand Phaser/Flanger User Manual download pdf (Page 9)

DEPTH Knob

The DEPTH knob sets how much of the selected modulation source is used

to modify the frequency responses that are created by the Phaser or Flanger

algorithms.

When using the Hot Hand as the selected modulation source, any signal

present at the

EXPRESSION IN jack is summed with the Hot Hand signal. The

Hot Hand signal is controlled by the

DEPTH control, while the EXPRESSION IN

signal is not. Thus the pedal always has the full range of control.

FREQUENCY/DELAY Knob

If the Phaser effect has been selected, the FREQUENCY/DELAY knob acts as an

offset for the Phaser’s frequency response characteristic. Counterclockwise

values will position the typical Phaser notches at lower frequencies than will

clockwise values.

If the Flanger effect is selected, the

FREQUENCY/DELAY knob scales all of

the delay times used in the Flanger together. Counterclockwise settings

give short delays, which will have fewer notches in the Flanger frequency

response. Clockwise settings will give longer delays, producing a more

complex sound.

DEPTH

(ALT) FREQUENCY/DELAY

00 08

Knobs | 17

Knobs

EFFECT Knob

The EFFECT knob switches between the various different effects. For a

description of each effect, please see page

24. There are 7 Phasers and 7

Flangers to select from. Some of the selection positions are “between” the

positions marked by the

LEDs; these are indicated by having both bracketing

LEDs on at the same time. Thus, when Phaser 02 is selected, the LEDs for

Phaser 01 and Phaser 03 are both on.

The effects selection jumps past the topmost three

LEDs, to go directly from

Phaser 07 to Flanger 01. Going from Flanger 07 to Phaser 01 requires going

through the position labeled

CALIBRATE. Simply scrolling through CALIBRATE

does not invoke the calibration function (although it does temporarily mute

the audio.)

The LEDs around this knob always display the current MOD SOURCE, as one

of the topmost three

LEDs. The three choices are HOT HAND, LFO/SEQ, and

ENVELOPE. The selection may be changed by holding down the SELECT pedal,

and moving the knob.

EFFECT

(ALT) MOD SOURCE

ENVELOPE

CALIBRATE

LFO/SEQ

HOT HAND

FLANGERPHASER

16 | Knobs

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 18 19

Comments to this Manuals

No comments

Source-audio Hot Hand Phaser/Flanger User Manual Page 9

Comments to this Manuals

Related products and manuals for Audio Source-audio Hot Hand Phaser/Flanger