Source-audio Soundblox Hub Manager User Manual download pdf (Page 5)

Source Audio Soundblox Hub Manager User Guide

Page 5 of 15

View Info

Displays detailed information about the selected pedal.

Channel (Device ID)

This is a unique identifier used by the hub to communicate with each connected pedal. This ID defaults

to 0 and does not need to be changed in most circumstances. It should only be changed if more than

one of the same type of pedal is connected to the same hub. For example, if two Dimension Reverb

pedals were connected to the same hub, then each one of them needs to have a unique device ID – the

first pedal could keep the default ID of 0, and the second pedal would need another ID, like 1.

Update Pedal Firmware

Updates the firmware (application software) running inside the pedal. Use this function to update your

pedal when Source Audio releases new firmware updates. The Hub Manager installer contains the latest

firmware for all hub-compatible Source Audio pedals. Upon selecting this option, you will be prompted

to locate the firmware update file (the *.hex file downloaded from the Source Audio website) in order to

complete the update. Each new version of the Hub Manager will contain the latest firmware files for all

compatible pedals in its installer. The firmware files are located in your user documents folder, in the

Source Audio\Soundblox Hub Manager\soundblox 2 firmware subdirectory.

WARNING: After initiating the firmware update, make sure to keep the pedal powered, and the hub

powered and connected to the computer via USB. If the pedal or hub is powered down or the USB

connection is interrupted during the firmware update, the update will fail.

1 2 3 4 5 6 7 8 9 10 ... 14 15

No comments

Source-audio Soundblox Hub Manager User Manual Page 5