Source-audio Soundblox 2 Multiwave Bass Distortion User Manual download pdf (Page 11)

Controls: Knobs | 11

DISTORTION MIX

This adjusts the overall level of the distorted signal. Along with the

CLEAN MIX knob, it can be used to balance the levels of clean vs. distor-

tion. Also, the overall output level can be increased by turning up both

clean and distortion mix levels.

TONE

The TONE knob along with the TONE SHAPE control will cut or boost the

Treble, Mid, or Bass frequencies depending on which mode is currently

selected. All three bands can be set to the default ﬂat (no cut and no

boost) by pressing and holding the TONE SHAPE button.

Note: Since the Soundblox 2 Multiwave Bass preset values can differ from

the physical knob positions, it can be useful to determine the positions of

the preset knob values. To do this, start with the pedal in bypass and set

all of the knobs to the full counter-clockwise position. Next, enable the

preset and slowly turn each knob up one at a time until the preset indica-

tor LED begins to blink rapidly. When this happens, the current position of

the knob matches the saved value.

BOOSTCUT

TONE

DISTORTION MIX

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

No comments

Source-audio Soundblox 2 Multiwave Bass Distortion User Manual Page 11