Source-audio Soundblox Pro Classic Distortion Pro User Manual download pdf (Page 6)

Controls: Equalizer | 1110 | Controls: Knobs

CONTROLS: EQUALIZER

One of the key features of the Classic Pro is the 7-band graphic equalizer.

The Equalizer is post distortion. Each band can be adjusted up or down

1 dB steps from -12 dB to +12 dB and the setting is indicated by the dis-

play. The display shows

1 dB steps by lighting adjacent LEDs with varying

brightness. The equalizer section has three controls:

BAND SELECT LEFT and RIGHT

The two buttons on either side of the

EQ knob select the frequency band

to edit.

EQ KNOB

The equalizer knob changes the value of the selected band up or down in

1 dB steps.

You can quickly and easily zero the equalizer by pressing both left and

right band select buttons at the same time. The equalizer display will

reset to a default “at” setting.

DRIVE 2

Adjust the amount of distortion after the

MIDRANGE control.

MIDRANGE

Provides boost or cut to pre-selected midrange frequency. The frequency

varies depending on the type of distortion selected with the

EFFECT knob.

OUTPUT

Adjusts the output level of the effect. This is useful for setting the level

of the effect compared to the bypass signal. Note that because the effect

compresses the signal, the dynamic range of the distorted signal will

be less compared to the dry signal. This should be accounted for when

setting levels.

DRIVE 2

MIDRANGE

OUTPUT

62 125 250 500 1K 2K 4K

+12

-12

< >

+12

-12

(NG) (HG) (HS) (HA) (HR)

EQKnob

BandSelectRightBandSelectLeft

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Source-audio Soundblox Pro Classic Distortion Pro User Manual Page 6

Comments to this Manuals

Related products and manuals for Audio Source-audio Soundblox Pro Classic Distortion Pro