Source-audio Soundblox Pro Multiwave Distortion Pro User Manual download pdf (Page 5)

Controls: Knobs | 98 | Connections

CONTROLS: KNOBS

EFFECT (not labeled)

The effect knob selects which distortion type will be used. There are

effect positions (

0 through 22) around the knob as well as a setting for

CLEAN BOOST/EQ. In the CLEAN BOOST/EQ mode, the distortion effect is

bypassed but the output, mix, and equalizer still apply. For information

on the individual settings see the Effect Types section.

SUSTAIN

There is a compressor before the distortion. The

SUSTAIN knob adjusts

the input gain of the compressor. The compression ratio and output vol-

ume can be adjusted as Backpage Parameters. Increasing the

SUSTAIN

control will result in a higher signal level going to the distortion, even

when

DRIVE remains xed. Increasing the amount of compression on the

signal effectively creates more sustain.

CONNECTIONS

GUITAR IN

Connect your guitar or other instrument here using a standard

MONO

¼" cable.

GUITAR OUT

Connect this to your amp, pedal, or other audio device.

EXPRESSION IN (optional)

Connect a passive expression pedal that uses a

TRS plug here. Allows

morphing of sounds between banks A and B.

SENSOR IN (optional)

Connect an optional Hot Hand sensor here, either wired or wireless.

SENSOR OUT (optional)

Use a Source Audio daisy-chain cable to connect this jack to the sensor

input of another pedal.

MIDI IN (optional)

MIDI program and continuous control input. Connect to a MIDI output

with a standard

MIDI cable

9V DC

Connect the included

9 Volt DC power supply here. Use of a non-Source

Audio power supply may cause damage and void the warranty.

MULTI BAND

SINGLE BAND

CLEAN BOOST / EQ

OCTAVE

NORMAL

FOLDBACK

OCTAVE

NORMAL

FOLDBACK

SUSTAIN

SENSOR

OUT

GUITAR IN GUITAR OUT

9V DC

EXP IN

MIDI IN

- Continued

1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Source-audio Soundblox Pro Multiwave Distortion Pro User Manual Page 5

Comments to this Manuals

Related products and manuals for Audio Source-audio Soundblox Pro Multiwave Distortion Pro